| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2023-08-08 | Add support for Tang Nano. | Catherine | |
| 2023-08-08 | Remove remaining Python 3.7 shims. | Catherine | |
| 2023-06-20 | cmod_a7: swap UART pins | Gwenhael Goavec-Merou | |
| 2023-05-23 | Add support for Upduino V3. | crzwdjk | |
| It has the same iCE40UP5k FPGA as the earlier Upduino versions but with an expanded GPIO connector and optional QSPI capability. | |||
| 2023-05-05 | cmod_a7: toolchain_program: use board name instead of cable + FPGA version | Gwenhael Goavec-Merou | |
| 2023-05-05 | cmod_a7: fix gpio:18 M3->N3 | Gwenhael Goavec-Merou | |
| 2023-03-25 | blackice_ii: fix incorrect SRAM /CE pin assignment | Christian Henz | |
| The /CE pin was assigned incorrectly (136 instead of 23), also pin 136 was assigned twice, so the SRAMResource failed to instantiate at all. Fixed version was tested successfully with HW. | |||
| 2023-03-07 | Add support for cmod_a7 and cmod_s7 boards. | Bastian Löher | |
| Signed-off-by: Bastian Löher <b.loeher@gsi.de> Co-authored-by: Robin Heinemann <robin.ole.heinemann@gmail.com> | |||
| 2023-02-21 | mister/de10-nano: In order to detect clock-stretching, i2c clock lines must ↵ | Olivier Galibert | |
| be bidirectional | |||
| 2023-02-03 | Update references to deprecated platform names. | Catherine | |
| 2023-01-13 | orangecrab_r0_2: fix typo (part 2) | Jonathan Neuschäfer | |
| The actual class still had the typo'd name. | |||
| 2023-01-11 | orangecrab_r0_2: fix typo. | Catherine | |
| Fixes #211. | |||
| 2023-01-08 | orangecrab_r0_2: add `-a 0` to dfu command | Daniel Maslowski | |
| The newer bootloader on the 85F variant exposes two devices. The first one (0) is the bitstream: Found DFU: [1209:5af0] ver=0101, devnum=51, cfg=1, intf=0, path="3-1", alt=1, name="0x00100000 RISC-V Firmware", serial="UNKNOWN" Found DFU: [1209:5af0] ver=0101, devnum=51, cfg=1, intf=0, path="3-1", alt=0, name="0x00080000 Bitstream", serial="UNKNOWN" See also: https://github.com/orangecrab-fpga/orangecrab-hardware/issues/48 Signed-off-by: Daniel Maslowski <info@orangecms.org> | |||
| 2023-01-08 | orangecrab_r0_2: add 85F device variant | Daniel Maslowski | |
| Signed-off-by: Daniel Maslowski <info@orangecms.org> | |||
| 2022-03-10 | versa_ecp5: fix LED polarity. | Catherine | |
| 2022-02-21 | ecpix5: use builtin FT2232 for programming. | Tobias Müller | |
| 2022-02-21 | ecpix5: use ULPIResource. | Tobias Müller | |
| 2022-02-16 | Add support for LogicBone board | Maya | |
| Based on the platform file by Owen Kirby <oskirby@gmail.com>: https://github.com/oskirby/logicbone-tests/blob/b8254bc7a177077abc939152cf0f3d3648f6a925/nmigen/logicbone_platform.py Also based on the platform file by Katherine Temkin <k@ktemkin.com>: https://github.com/greatscottgadgets/luna/blob/08b035c9c2b053d7edffb0d220d948b5c2ca927e/luna/gateware/platform/logicbone.py | |||
| 2022-02-08 | genesys2: don't pass strings as resource numbers. | Catherine | |
| This was never supported, but was previously unchecked. | |||
| 2021-12-15 | icebitsy: Added the pmod breakout pmod connectors. | Piotr Esden-Tempski | |
| 2021-12-15 | icebitsy: The edge pin numbering starts at 0 | Piotr Esden-Tempski | |
| 2021-12-14 | ulx3s: add missing ADC resource number. | Catherine | |
| 2021-12-12 | icebreaker-bitsy: Increase the programming routine flexibility. | Piotr Esden-Tempski | |
| This adds: * The ability to reset the target after bitstream programming. * The ability to select the Runtime vid:pid that might differ from project to project. * The ability to override the default DFU vid:pid if needed. | |||
| 2021-12-10 | Rename nMigen to Amaranth HDL. | whitequark | |
 |
index : amaranth-boards | |
| Board definitions for Amaranth HDL |
| aboutsummaryrefslogtreecommitdiff |
path: root/amaranth_boards