1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
|
import os
import subprocess
from amaranth.build import *
from amaranth.vendor import IntelPlatform
from .resources import *
__all__ = ["MisterPlatform"]
# The MiSTer platform is built around the DE10-Nano; if you update one you should update the other.
class MisterPlatform(IntelPlatform):
device = "5CSEBA6" # Cyclone V 110K LEs
package = "U23" # UBGA-484
speed = "I7"
default_clk = "clk50"
resources = [
Resource("clk50", 0, Pins("V11", dir="i"),
Clock(50e6), Attrs(io_standard="3.3-V LVTTL")),
Resource("clk50", 1, Pins("Y13", dir="i"),
Clock(50e6), Attrs(io_standard="3.3-V LVTTL")),
Resource("clk50", 2, Pins("E11", dir="i"),
Clock(50e6), Attrs(io_standard="3.3-V LVTTL")),
*LEDResources(
pins="W15 AA24 V16 V15 AF26 AE26 Y16 AA23",
attrs=Attrs(io_standard="3.3-V LVTTL")),
*ButtonResources(
pins="AH17 AH16", invert=True,
attrs=Attrs(io_standard="3.3-V LVTTL")),
*SwitchResources(
pins="Y24 W24 W21 W20",
attrs=Attrs(io_standard="3.3-V LVTTL")),
# Arduino header
UARTResource(0,
rx="AG13", tx="AF13",
attrs=Attrs(io_standard="3.3-V LVTTL")),
# LTC2308 analogue-to-digital converter
SPIResource(0,
cs_n="U9", clk="V10", copi="AC4", cipo="AD4",
attrs=Attrs(io_standard="3.3-V LVTTL")),
# ADV7513 HDMI transmitter
# Note this has a lot of input formats for tx_d, but this defaults to RGB24
Resource("adv7513", 0,
Subsignal("tx_d_r", Pins("AD12 AE12 W8 Y8 AD11 AD10 AE11 Y5", dir="o")),
Subsignal("tx_d_g", Pins("AF10 Y4 AE9 AB4 AE7 AF6 AF8 AF5", dir="o")),
Subsignal("tx_d_b", Pins("AE4 AH2 AH4 AH5 AH6 AG6 AF9 AE8", dir="o")),
Subsignal("tx_clk", Pins("AG5", dir="o")),
Subsignal("tx_de", Pins("AD19", dir="o")),
Subsignal("tx_hs", Pins("T8", dir="o")),
Subsignal("tx_vs", Pins("V13", dir="o")),
Subsignal("tx_int", Pins("AF11", dir="i")),
Subsignal("i2s0", Pins("T13", dir="o")),
Subsignal("mclk", Pins("U11", dir="o")),
Subsignal("lrclk", Pins("T11", dir="o")),
Subsignal("sclk", Pins("T12", dir="o")),
Subsignal("scl", Pins("U10", dir="io")),
Subsignal("sda", Pins("AA4", dir="io")),
Attrs(io_standard="3.3-V LVTTL")),
# MiSTer SDRAM Board (required)
# https://github.com/MiSTer-devel/Hardware_MiSTer/blob/master/releases/sdram_xs_2.2.pdf
SDRAMResource(0,
clk="20", cs_n="33", we_n="27", ras_n="32", cas_n="31",
ba="34 35", a="37 38 39 40 28 25 26 23 24 21 36 22 19",
dq="1 2 3 4 5 6 7 8 18 17 16 15 14 13 9 10",
dqm="", conn=("gpio", 0), attrs=Attrs(io_standard="3.3-V LVCMOS")),
# MiSTer I/O Board (optional, but highly recommended)
# https://github.com/MiSTer-devel/Hardware_MiSTer/blob/master/releases/iobrd_6.0.pdf
Resource("power_led", 0, PinsN("1", dir="o", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
Resource("disk_led", 0, PinsN("3", dir="o", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
Resource("user_led", 0, PinsN("5", dir="o", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
Resource("reset_switch", 0, PinsN("17", dir="i", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
Resource("osd_switch", 0, PinsN("13", dir="i", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
Resource("user_switch", 0, PinsN("15", dir="i", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
Resource("audio", 0,
Subsignal("l", Pins("2", dir="o", conn=("gpio", 1))),
Subsignal("r", Pins("7", dir="o", conn=("gpio", 1))),
Attrs(io_standard="3.3-V LVTTL")),
Resource("toslink", 0, Pins("9", dir="o", conn=("gpio", 1))),
*SDCardResources(0,
clk="13", cmd="8",
dat0="16", dat1="18", dat2="4", dat3="6",
conn=("gpio", 1), attrs=Attrs(io_standard="3.3-V LVTTL")),
# The schematic is difficult to understand here...
VGAResource(0,
r="28 32 34 36 38 40",
g="27 31 33 35 37 39",
b="21 23 25 26 24 24",
hs="20", vs="19",
conn=("gpio", 1),
attrs=Attrs(io_standard="3.3-V LVTTL"))
]
connectors = [
# Located on the top of the board, above the chip.
Connector("gpio", 0,
"V12 E8 W12 D11 D8 AH13 AF7 AH14 AF4 AH3 "
"- - AD5 AG14 AE23 AE6 AD23 AE24 D12 AD20 "
"C12 AD17 AC23 AC22 Y19 AB23 AA19 W11 - - "
"AA18 W14 Y18 Y17 AB25 AB26 Y11 AA26 AA13 AA11 "),
# Located on the bottom of the board.
Connector("gpio", 1,
"Y15 AC24 AA15 AD26 AG28 AF28 AE25 AF27 AG26 AH27 "
"- - AG25 AH26 AH24 AF25 AG23 AF23 AG24 AH22 "
"AH21 AG21 AH23 AA20 AF22 AE22 AG20 AF21 - - "
"AG19 AH19 AG18 AH18 AF18 AF20 AG15 AE20 AE19 AE17 "),
Connector("arduino", 0,
"AG13 AF13 AG10 AG9 U14 U13 AG8 AH8 "
"AF17 AE15 AF15 AG16 AH11 AH12 AH9 AG11 "
"AH7"),
]
def toolchain_program(self, products, name):
quartus_pgm = os.environ.get("QUARTUS_PGM", "quartus_pgm")
with products.extract("{}.sof".format(name)) as bitstream_filename:
# The @2 selects the second device in the JTAG chain, because this chip
# puts the ARM cores first.
subprocess.check_call([quartus_pgm, "--haltcc", "--mode", "JTAG",
"--operation", "P;" + bitstream_filename + "@2"])
if __name__ == "__main__":
from .test.blinky import Blinky
MisterPlatform().build(Blinky(), do_program=True)
|
