1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
|
This repository contains [flash programming algorithms][fpa] for i.MX RT MCUs.
The algorithms are designed for use in [probe-rs]. They're written in Rust and
support a variety of MCUs and flash parts.
These flash programming algorithms compete with NXP's flash programming
algorithms, which are distributed in device family packs (DFPs). NXP's
algorithms also work with probe-rs, so prefer those if you want something
official.
I've found these algorithms can program flash 2x to 3x faster than NXP's
offerings. These algorithms definitely support page crossings; meaning, if the
debug probe wants to program 4KiB into flash, the algorithm will automatically
chunk it into pages of 256 bytes. This trick reduces I/O overhead between host
and debug probe. (Admittedly, NXP's algorithms might support this, but I never
tried. It's fun writing these algorithms!)
Supported boards include
- IMXRT1010EVK
- IMXRT1040EVK
- IMXRT1160EVK
- IMXRT1170EVK
You'll find the algorithms in their respective top-level directories. These
four boards sport four different MCUs, which you'll also find in the top-level
directories. Furthermore, those four boards have three different flash parts;
the flash part implementation is in `src/` as part of the core package.
Before attempting to generate the flash programming algorithms for [probe-rs],
install the `target-gen` tool. It's available in the probe-rs repository. [My
fork][probe-rs-fork] has some `target-gen` patches that might be useful.
Here's how to generate the algorithm, represented as YAML, for the 1010EVK:
```
cargo --config .cargo/flash_algo.toml run --release --package=imxrt1010evk
```
To generate the algorithm for a different EVK, change the `--package` selection.
Some of the EVKs have a smoke test that checks read, erase, and write with its
flash part. Keep in mind that this will manipulate your board's flash, and it
might change something you care about!
To run the smoke test on the 1010EVK, power on your EVK and connect it to your
host. Then, submit
```
cargo --config .cargo/imxrt1010.toml run --release --package=imxrt1010evk --example=smoke
```
to flash the example with probe-rs. If you change the EVK, change the Cargo
configuration for your MCU as well as your package.
[fpa]: https://open-cmsis-pack.github.io/Open-CMSIS-Pack-Spec/main/html/flashAlgorithm.html
[probe-rs]: https://probe.rs
[probe-rs-fork]: https://github.com/mciantyre/probe-rs
Eventually, I might try to define a universal flash programming algorithm,
one that works across different flash parts. But for now, they're separate by
manufacturer.
License: APACHE-2.0
|
