1 files changed, 116 insertions, 0 deletions
diff --git a/book/en/src/by-example/delay.md b/book/en/src/by-example/delay.md
new file mode 100644
index 0000000..d35d9da
--- /dev/null
+++ b/book/en/src/by-example/delay.md
@@ -0,0 +1,116 @@
+# Tasks with delay
+
+A convenient way to express *miniminal* timing requirements is by means of delaying progression. 
+
+This can be achieved by instantiating a monotonic timer:
+
+```rust
+...
+rtic_monotonics::make_systick_timer_queue!(TIMER);
+
+#[init]
+fn init(cx: init::Context) -> (Shared, Local) {        
+    let systick = Systick::start(cx.core.SYST, 12_000_000);
+    TIMER.initialize(systick);
+    ... 
+```
+
+A *software* task can `await` the delay to expire:
+
+```rust
+#[task]
+async fn foo(_cx: foo::Context) {
+    ...
+    TIMER.delay(100.millis()).await;
+    ...
+```
+
+Technically, the timer queue is implemented as a list based priority queue, where list-nodes are statically allocated as part of the underlying task `Future`. Thus, the timer queue is infallible at run-time (its size and allocation is determined at compile time).
+
+For a complete example:
+
+``` rust
+{{#include ../../../../rtic/examples/async-delay.rs}}
+```
+
+``` console
+$ cargo run --target thumbv7m-none-eabi --example async-delay --features test-critical-section 
+{{#include ../../../../rtic/ci/expected/async-delay.run}}
+```
+
+## Timeout
+
+Rust `Futures` (underlying Rust `async`/`await`) are composable. This makes it possible to `select` in between `Futures` that have completed.
+
+A common use case is transactions with associated timeout. In the examples shown below, we introduce a fake HAL device which performs some transaction. We have modelled the time it takes based on the input parameter (`n`) as `350ms + n * 100ms)`. 
+
+Using the `select_biased` macro from the `futures` crate it may look like this:
+
+```rust
+// Call hal with short relative timeout using `select_biased`
+select_biased! {
+    v = hal_get(&TIMER, 1).fuse() => hprintln!("hal returned {}", v),
+    _ = TIMER.delay(200.millis()).fuse() =>  hprintln!("timeout", ), // this will finish first
+}
+```
+
+Assuming the `hal_get` will take 450ms to finish, a short timeout of 200ms will expire.
+
+```rust
+// Call hal with long relative timeout using `select_biased`
+select_biased! {
+    v = hal_get(&TIMER, 1).fuse() => hprintln!("hal returned {}", v), // hal finish first
+    _ = TIMER.delay(1000.millis()).fuse() =>  hprintln!("timeout", ),
+}
+```
+
+By extending the timeout to 1000ms, the `hal_get` will finish first.
+
+Using `select_biased` any number of futures can be combined, so its very powerful. However, as the timeout pattern is frequently used, it is directly supported by the RTIC [rtc-monotonics] and [rtic-time] crates. The second example from above using `timeout_after`:
+
+```rust
+// Call hal with long relative timeout using monotonic `timeout_after`
+match TIMER.timeout_after(1000.millis(), hal_get(&TIMER, 1)).await {
+    Ok(v) => hprintln!("hal returned {}", v),
+    _ => hprintln!("timeout"),
+}
+```
+
+In cases you want exact control over time without drift. For this purpose we can use exact points in time using `Instance`, and spans of time using `Duration`. Operations on the `Instance` and `Duration` types are given by the [fugit] crate.
+
+[fugit]: https://crates.io/crates/fugit
+
+```rust
+// get the current time instance
+let mut instant = TIMER.now();
+
+// do this 3 times
+for n in 0..3 {
+    // exact point in time without drift
+    instant += 1000.millis();
+    TIMER.delay_until(instant).await;
+
+    // exact point it time for timeout
+    let timeout = instant + 500.millis();
+    hprintln!("now is {:?}, timeout at {:?}", TIMER.now(), timeout);
+
+    match TIMER.timeout_at(timeout, hal_get(&TIMER, n)).await {
+        Ok(v) => hprintln!("hal returned {} at time {:?}", v, TIMER.now()),
+        _ => hprintln!("timeout"),
+    }
+}
+```
+
+`instant = TIMER.now()` gives the baseline (i.e., the exact current point in time). We want to call `hal_get` after 1000ms relative to this exact point in time. This can be accomplished by `TIMER.delay_until(instant).await;`. We define the absolute point in time for the `timeout`, and call `TIMER.timeout_at(timeout, hal_get(&TIMER, n)).await`. For the first loop iteration `n == 0`, and the `hal_get` will take 350ms (and finishes before the timeout). For the second iteration `n == 1`, and `hal_get` will take 450ms (and again succeeds to finish before the timeout).  For the third iteration `n == 2` (`hal_get` will take 5500ms to finish). In this case we will run into a timeout.
+
+
+The complete example:
+
+``` rust
+{{#include ../../../../rtic/examples/async-timeout.rs}}
+```
+
+``` console
+$ cargo run --target thumbv7m-none-eabi --example async-timeout --features test-critical-section 
+{{#include ../../../../rtic/ci/expected/async-timeout.run}}
+```