1 files changed, 173 insertions, 0 deletions
diff --git a/drivers/ccm-11xx/src/ral_11xx/osc_pll.rs b/drivers/ccm-11xx/src/ral_11xx/osc_pll.rs
new file mode 100644
index 0000000..c4f10ba
--- /dev/null
+++ b/drivers/ccm-11xx/src/ral_11xx/osc_pll.rs
@@ -0,0 +1,173 @@
+#[repr(C)]
+#[allow(non_snake_case)]
+pub struct RegisterBlock {
+    pub DIRECT: u32,
+    pub DOMAIN: u32,
+    pub SETPOINT: u32,
+    _reserved: [u8; 4],
+    pub STATUS0: u32,
+    pub STATUS1: u32,
+    pub CONFIG: u32,
+    pub AUTHEN: u32,
+}
+
+ral_registers::register! {
+    #[doc = "Clock source direct control"]
+    pub DIRECT<u32> RW [
+        #[doc = "turn on clock source"]
+        ON start(0) width(1) RW {}
+    ]
+}
+
+ral_registers::register! {
+    #[doc = "Clock source domain control"]
+    pub DOMAIN<u32> RW [
+        #[doc = "Current dependence level"]
+        LEVEL start(0) width(3) RW {}
+        #[doc = "Dependence level"]
+        LEVEL0 start(16) width(3) RW {}
+        #[doc = "Depend level"]
+        LEVEL1 start(20) width(3) RW {}
+        #[doc = "Depend level"]
+        LEVEL2 start(24) width(3) RW {}
+        #[doc = "Depend level"]
+        LEVEL3 start(28) width(3) RW {}
+    ]
+}
+
+ral_registers::register! {
+    #[doc = "Clock source Setpoint setting"]
+    pub SETPOINT<u32> RW [
+        #[doc = "Setpoint"]
+        SETPOINT start(0) width(16) RW {}
+        #[doc = "Standby"]
+        STANDBY start(16) width(16) RW {}
+    ]
+}
+
+ral_registers::register! {
+    #[doc = "Clock source working status"]
+    pub STATUS0<u32> RO [
+        #[doc = "Clock source current state"]
+        ON start(0) width(1) RO {}
+        #[doc = "Clock source active"]
+        STATUS_EARLY start(4) width(1) RO {}
+        #[doc = "Clock source ready"]
+        STATUS_LATE start(5) width(1) RO {}
+        #[doc = "Domains that own this clock source"]
+        ACTIVE_DOMAIN start(8) width(4) RO {}
+        #[doc = "Enable status from each domain"]
+        DOMAIN_ENABLE start(12) width(4) RO {}
+        #[doc = "In use"]
+        IN_USE start(28) width(1) RO {}
+    ]
+}
+
+ral_registers::register! {
+    #[doc = "Clock source low power status"]
+    pub STATUS1<u32> RO [
+        #[doc = "Domain0 Low Power Mode"]
+        CPU0_MODE start(0) width(2) RO {
+            #[doc = "Run"]
+            RUN = 0,
+            #[doc = "Wait"]
+            WAIT = 0x1,
+            #[doc = "Stop"]
+            STOP = 0x2,
+            #[doc = "Suspend"]
+            SUSPEND = 0x3,
+        }
+        #[doc = "Domain0 request enter Low Power Mode"]
+        CPU0_MODE_REQUEST start(2) width(1) RO {}
+        #[doc = "Domain0 Low Power Mode task done"]
+        CPU0_MODE_DONE start(3) width(1) RO {}
+        #[doc = "Domain1 Low Power Mode"]
+        CPU1_MODE start(4) width(2) RO {
+            #[doc = "Run"]
+            RUN = 0,
+            #[doc = "Wait"]
+            WAIT = 0x1,
+            #[doc = "Stop"]
+            STOP = 0x2,
+            #[doc = "Suspend"]
+            SUSPEND = 0x3,
+        }
+        #[doc = "Domain1 request enter Low Power Mode"]
+        CPU1_MODE_REQUEST start(6) width(1) RO {}
+        #[doc = "Domain1 Low Power Mode task done"]
+        CPU1_MODE_DONE start(7) width(1) RO {}
+        #[doc = "Domain2 Low Power Mode"]
+        CPU2_MODE start(8) width(2) RO {
+            #[doc = "Run"]
+            RUN = 0,
+            #[doc = "Wait"]
+            WAIT = 0x1,
+            #[doc = "Stop"]
+            STOP = 0x2,
+            #[doc = "Suspend"]
+            SUSPEND = 0x3,
+        }
+        #[doc = "Domain2 request enter Low Power Mode"]
+        CPU2_MODE_REQUEST start(10) width(1) RO {}
+        #[doc = "Domain2 Low Power Mode task done"]
+        CPU2_MODE_DONE start(11) width(1) RO {}
+        #[doc = "Domain3 Low Power Mode"]
+        CPU3_MODE start(12) width(2) RO {
+            #[doc = "Run"]
+            RUN = 0,
+            #[doc = "Wait"]
+            WAIT = 0x1,
+            #[doc = "Stop"]
+            STOP = 0x2,
+            #[doc = "Suspend"]
+            SUSPEND = 0x3,
+        }
+        #[doc = "Domain3 request enter Low Power Mode"]
+        CPU3_MODE_REQUEST start(14) width(1) RO {}
+        #[doc = "Domain3 Low Power Mode task done"]
+        CPU3_MODE_DONE start(15) width(1) RO {}
+        #[doc = "Next Setpoint to change to"]
+        TARGET_SETPOINT start(16) width(4) RO {}
+        #[doc = "Current Setpoint"]
+        CURRENT_SETPOINT start(20) width(4) RO {}
+        #[doc = "Clock gate turn off request from GPC Setpoint"]
+        SETPOINT_OFF_REQUEST start(24) width(1) RO {}
+        #[doc = "Clock source turn off finish from GPC Setpoint"]
+        SETPOINT_OFF_DONE start(25) width(1) RO {}
+        #[doc = "Clock gate turn on request from GPC Setpoint"]
+        SETPOINT_ON_REQUEST start(26) width(1) RO {}
+        #[doc = "Clock gate turn on finish from GPC Setpoint"]
+        SETPOINT_ON_DONE start(27) width(1) RO {}
+        #[doc = "Clock gate turn off request from GPC standby"]
+        STANDBY_IN_REQUEST start(28) width(1) RO {}
+        #[doc = "Clock source turn off finish from GPC standby"]
+        STANDBY_IN_DONE start(29) width(1) RO {}
+        #[doc = "Clock gate turn on finish from GPC standby"]
+        STANDBY_OUT_DONE start(30) width(1) RO {}
+        #[doc = "Clock gate turn on request from GPC standby"]
+        STANDBY_OUT_REQUEST start(31) width(1) RO {}
+    ]
+}
+
+ral_registers::register! {
+    #[doc = "Clock source configuration"]
+    pub CONFIG<u32> RO [
+        #[doc = "Automode Present"]
+        AUTOMODE_PRESENT start(1) width(1) RO {}
+        #[doc = "Setpoint present"]
+        SETPOINT_PRESENT start(4) width(1) RO {}
+    ]
+}
+
+#[allow(non_snake_case)]
+pub mod AUTHEN {
+    pub use super::super::clock_root::AUTHEN::*;
+    #[allow(non_upper_case_globals)]
+    pub mod CPULPM {
+        pub const access: ral_registers::Access = ral_registers::Access::RW;
+        pub const offset: u32 = 18;
+        pub const mask: u32 = 1 << 18;
+        #[doc(hidden)]
+        pub mod vals {}
+    }
+}